How to design a made-to-measure picture mount in the picture mount designer. The designer has five tabs, 1 Mount sizes to 5 Review, and the preview on the left updates as you go. This guide follows them in four parts, each with its own short video.
Example: a double mount for a 400 × 300mm picture, 500 × 400mm outside. Recorded 18 October 2026.
Part 1: Mount sizes
Enter the size of your picture and the outside size of the mount, see how the size box works out the rest, try Exact Size and a double mount, and see what the sizes refer to.
Prefer our earlier video? Watch “How To Order A Picture Mount” on YouTube.
Enter the two sizes
The designer opens in simple mode, with Advanced, Single/Double and Exact Size switched off. You only need two sizes:
- To Take Image Size: the size of your picture. Here, 400 × 300mm.
- External Mount Size: the outside size of the whole mount, usually the size of the frame it's going in. Here, 500 × 400mm.
Then click Update Mount Sizes. The box underneath works out the rest:
- Outside size 500 × 400mm.
- Opening 394 × 294mm, overlapping your artwork by 3mm on each side. The opening is cut a little smaller than your picture so the mount holds its edges.
- Borders: 50mm on every side, plus the 3mm overlap.
How the size box changes
Change either size, click Update Mount Sizes, and the box updates. Making the mount 440mm high keeps the sides at 50mm but makes the top and bottom borders 70mm: the picture stays centred, and the extra space is shared between top and bottom.
Each border must be at least 20mm, so the outside size must be at least 40mm bigger than the picture each way (50mm for a double mount). If it isn't, the designer explains the problem and makes no change.
Exact Size and Single/Double
Exact Size cuts the opening to exactly your picture size, with no overlap: “Opening cut to exactly 400 × 300mm”. Use it when every edge of the picture must show, for example a signature close to the edge. The picture is then fixed behind the mount, not held by its edges.
Single/Double switches to a double mount: a thin second layer under the first, showing as a narrow line of colour around your picture. The outside size stays 500 × 400mm; the top layer's borders become 45mm, with a 5mm bottom layer showing inside.
What the sizes refer to
Click Mount sizes above the preview for a measured drawing of your mount:
- The outside size, 500 × 400mm, is the size of the mount board itself, and of the frame it goes in.
- The opening, in blue, is 394 × 294mm: 3mm inside your 400 × 300mm picture all round.
- The borders are measured from the outside edge to the opening.
Part 2: Advanced mode
Set each border width yourself, a reminder about Exact Size, and aperture shapes, corners and title boxes.
Different border widths
Switch on Advanced and the External Mount Size is replaced by Border widths: Top, Left, Right, Bottom, and the Bottom mount width for a double mount. In advanced mode you set the borders and the outside size is worked out for you.
A slightly deeper bottom border is a classic look. Changing the bottom to 60mm and clicking Update Mount Sizes makes the outside size 500 × 415mm: 15mm taller.
Exact Size, again
Exact Size works the same way in advanced mode. Without it, the opening overlaps your picture by 3mm on each side (394 × 294mm for a 400 × 300mm picture); with it, the opening is exactly your picture size.
Shape, corners and title box
- Aperture Shape: rectangle, oval, arch, bevel top, bell top and more. The preview shows the shape you choose.
- Corners: straight, or decorative cut, stepped and stepped-cut corners.
- Add title box: a small second opening below your picture, for a name, title or caption. You can set its width and height, and the outside size grows to make room for it (here, 500 × 410mm).
In the video we go back to a plain rectangle with straight corners and no title box.
Part 3: Colours, backing and extras
Choose the colour of each mount layer, an optional backing board, and any extras.
Mount colours
In 2 Mount colours, a double mount has two tabs, Top mount and Bottom mount: click one, then click a colour. There are standard white-core boards in over 30 colours, plus suede, black-core, metallic, conservation (solid core) and neon boards. Here the top mount is Off White and the bottom mount Slate Grey.
Backing
3 Backing adds an optional board behind your picture, with no opening cut in it, in the same colours as the mounts. No backing is selected to start with. A backing supports your picture and gives the mount a finished back. Here, Snow White.
Extras
4 Extras lists foam and barrier boards, tapes, hangers and fixings. Click Add to include one: here a roll of 9mm double-sided foam tape (£3.00), to fix your picture behind the mount.
Part 4: Review
Check the specification, save or email your design, and add it to your basket.
Check the specification
The 5 Review tab lists everything you've chosen. In this example it read:
| External mount size | 500 × 400mm |
|---|---|
| To take image size | 400 × 300mm |
| Top mount | 8065 · Off White, borders 45mm all round |
| Bottom mount | 8159 · Slate Grey, 5mm |
| Backing | 8001 · Snow White |
| Accessory | 9mm Double Sided Extra Strong Foam Mounting Tape × 10m |
The price was £24.64.
Below the designer: the Mount specification of each board you've chosen (with links to order a sample of each), Your design, and Delivery and savings, including volume discounts on identical items (3+, 10+ or 20+).
Save design or email design
- Save design adds it to your Design Gallery. You can type a title and click Update Title, open the gallery, or click Continue.
- Email design opens a form. Enter the recipient's email address, edit the personal message, type the verification word, then click Submit.
The email form was opened in this demo but nothing was sent.
Add to basket
Click Add to basket. The confirmation repeats the key details: “Your £24.64 Custom Picture Mount has been added to your basket. Mount prepared for artwork size: 400 X 300mm (the mount opening will overlap this size by 3mm on each side). External mount size: 500 X 400mm.” From there, choose Continue, Basket or Checkout.
Screenshots taken from the live site on 18 October 2026. The orange outlines and labels were added for this guide and aren't part of the site. The demo stopped at the basket, and no order or email was sent. Prices may change.